Overview

Many car owners prefer to maintain and clean car by self because it provides you mentally satisfaction and saves money. To clean a car you should know how you can access your car floor and how to remove the car seat from the base. The seating attached system is not the same in all cars some cars depend on the model, make and manufacture year. You just need some screws and other tools to remove your car’s seat from the base and cleaning the car. It’s very essential to know about how to remove car parts and fix them.

Sometimes car seats are stuck and for this purpose removing the car seat from the base is the best option rather than wiggle. Removing the car seat from the base is not difficult. It connecting with the base with some bolts and you can easily unscrew the bolts by following the below mention tips. We will provide you all the essential information about how you can remove your car seat to cleaning up the car or change your car carpet.


Overview

Also Checkout: Did You Know How to Program Car Alarm Remote

How to Remove Car Seat from Base

Before starting removing the seat from the base just confirm that you have all the required tools like a socket set, ratchet, wrench, screwdriver, and a plastic bag for removing the car seat.

Turn-Off Ignition

The first step is to turn-off ignition because some wires are connected at the underside that can be a cause of a short circuit.


Turn-Off Ignition

Also Checkout: All You Need to Know About How to Fix Car Speakers

Remove Bolts

All car seats are placed with four bolts that securely connect the seat to the floor. Two bolts are placed at the front and two at the rear side. Old model car seats are bolted to the direct floor and new model cars seat bolted to a mounting bracket. Bolts are concealed with a decorative plastic cap and to remove these plastic screwdriver box required. Unscrew the plastic bag and by using the bolt remover tools to remove bolts.


Remove Bolts

Also Checkout: How to Change Car Navigation From Japanese to English

Tilting Car Seat

After removing all the four bolts successfully the next step is to tilting the car seat forward to reveal the wire if any is connected. If any wire is connected unplug it very carefully because these are connected with your seat belt sensor, seat position control, and heater. Remove your car seat very carefully. Cover the wires with a plastic bag or anything that will be secure for wires. Do not forget to cover wires.

Tilting Car Seat

Also Checkout: Did You Know How to Fix a Stuck Manual Car Seat

Revise the Process for Replace

After cleaning or fixing the issues replace your car seat. Take your time to complete the process very carefully. Plug-in all the underside and make sure you have connected the wires as you were un-plugged. Connect the rear and front bolts tightly to make sure that the seat is securely attached to the base.


Revise the Process for Replace

Also Checkout: Have A Look At How to Fix a Touch Screen Car Stereo

Is the Car Seat Removing Process is the same for All Cars?

The car seat removal process is not the same in all vehicles it depends on the vehicle make and model. But all cars are connected to the base with bolts. Bolts are securely connecting the seat to the base. The above mention tips are helpful to remove the bolts and after removing the bolts and wires seat can be easily removed from the base. Take out the seat from the car very carefully to save the doors and interior from scratches.


Is the Car Seat Removing Process is the same for All Cars

Also Checkout: Did You Know How to Fix Loose Aux Port in Car

Conclusion

By following the above mention tips you can easily remove your car’s front seat. Do not do the process if you have no idea how to unscrew the bolts and unplug the wires. However, it’s not a difficult process of removing a car seat but it’s a technical process. Most of the time we need to remove the seat to clean our car. In case of clean your car must be covered the wires a turn-off ignition.

Recent Articles:

Share it!