There are so many different types of stereo variants available in the market. Car’s stereo fixed in the vehicle according to its features and requirements. The modern vehicles get new and advance digital car stereo. However, the old cars have configurations and control car stereo according to car features. Nowadays digital display uses at high priority in cars because its demand is very high in the market. Touchscreen display stereo offers multiple functions with very easy access. Many fresh and advanced features available in touchscreen stereo display but sometimes when things become easy its required more attention for care. The frequent use of touchscreen sometimes causes you to stuck your screen. If your touch screen car stereo is damaged and needs to replace you can easily replace it by following the below mention tips. How to fix a touch screen car stereo never be impossible for anyone if you know how to handles the electric wires.
Also Checkout: Hyundai Elantra N Line 2021! Looks More Sharper
Tools Required to Fix Broken Touch Screen Car Stereo
You need to know which tools are required to fix your broken car stereo touchscreen.
- Panel remover
- Screen cleaning kit
- Double sticking tape
- Microfiber cloth
- Screen protector
These are the basic tools that you must be required to replace the new touch screen car stereo. When you have all these things you can perform this process by following the below mention tips.
How to Replace a Touch Screen Car Stereo
Replace your car damaged touchscreen by following the below mention and save your money to spend on a mechanic. Don’t remember to turn off your car before starting this process. Make sure there is no electric power supply On in the car.
Also Checkout: Great News! New Hampshire Has Made Flying Cars Road-Legal
Take Out the Car Stereo
Before start opening the touchscreen stereo must be wear gloves for protection. Use the above mention tools to take out the stereo. The first step is you need to remove the panel with panel removal which is on the sides of the stereo. When you remove the panel you have seen there are so many screws around the stereo that is connected the stereo to the dashboard. Use a screwdriver to unscrew all the screws very carefully and with soft hands. Once you have successfully open all the screws take out the car stereo that is coming out with several wires. It’s better to record all the process because you have to repeat for replacing new touch screen stereo. Take each wire out from the stereo to place a new touchscreen. Your recorded video will help you to re-connect all wires back to the new one very easily.
Also Checkout: How You Can Improve Driving Skills
Open your Car Stereo
When you have successfully disconnected all the wires from the car stereo. Find the best and comfortable place where you can work on the car stereo with much attention. By using the car screwdriver to open the car stereo, there are several screws on the surface of the stereo. You have to unscrew all these and open the front panel of the stereo. Car stereo body is joined with lock and you need to apply a force in the right direction to open it. You can also use panel remover for this purpose.
Also Checkout: How To Drive Safely On the Beach?
Disconnected Wires from the Screen Panel
When you have open the chassis you will see a set of circuits and wires going towards the touchscreen panel. You need to disconnect all these wires from the motherboard of the car stereo very carefully. Remember that if the motherboard is laying inside the chassis then you need to open all the screws but if it’s at the exact position where the touchscreen is located then you have to open all the screws. Disconnect the motherboard from the panel and separate the touchscreen for moving to the next step.
Also Checkout: Honda Discontinues Civic Coupe, Fit and Accord Manually
Remove the Old Touchscreen and Place New One
The touchscreen is always connected with glue that is connected to the touchscreen forever with the panel. Remove the old screen to place a new one. Remove the touchscreen and use a cleaning kit to clean the LCD. Make sure you have to clean the LCD before placing a new touchscreen. After cleaning the LCD connect a new touchscreen to your car stereo. As we have already explained that touchscreen is connected with glue so for a new touchscreen you need to connect it with glue.
Also Checkout: Living Vehicles Officially Revealed Travel Trailer 2021
Connect All the Wires Back
After connecting the touchscreen with the panel wait until the glue is dry. After that connect all the wires back to the motherboard and panel as you disconnect it. For this process, if you have recorded a video then you can do it very easily. Revise the process of disconnecting to connecting and you will be successfully placing a new touchscreen.
Also Checkout: Why You Need Inspection Report While Buying Used Cars
Use Protector For Touchscreen
Protectors are available in the market and very helpful to save your LED touch. Transparent and jelly protectors available in the market use protector to save your car touchscreen from scratches. Sometimes frequently touching the screen makes scratches on the touchscreen.
With the help of above mention tips, you can fix your car stereo touchscreen and save money that you will spend on a car mechanic. During the process of placing a new touchscreen always remember if you are going wrong then consult with a professional or call a car mechanic because it’s a very sensitive process. If you missed one wire or never connect all the wires correctly it may cause short circuits and damaged your LED and touchscreen. We have provided you all the essential information about car stereo touch screen repair or replacement.